  |
           |
 |
| MAIN
PROJECT DONE BY HHTC |
| Project: |
GHAZI-BAROTHA Hydro Power Project
|
| Contractor: |
Ghazi Barotha Contractors.
(China + Pak) |
| Location: |
Dist Attock, Pakistan |
| Tenure: |
1996~2000 |
| Project Value: |
Approx Rs. 126 Millions |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Fabrication of
Concrete Batching Plant C01 and C02 Approx 650 Tons
Each.
|
| 2. |
Fabrication
and Erection of Cement Storage Silos 100,200 and 300
Tons Capacity. |
| 3. |
Fabrication
of Light Towers. (174 Tons). |
| 4. |
Fabrication
of Water Pipeline 14” ? 7000 Meter Long (130
Tons) with both side flanges. |
| 5. |
Fabrication
of Steel Structure of Retaining Walls Approx 100 Tons. |
| 6. |
Fabrication
and Erection of Steel Yard Sheds, Fly Ash Storage
Shed and Compressor Shed Approx 125 Tons. |
| 7. |
Fabrication
of Anchor Pads 15 Tons. |
| 8. |
Fabrication
and Galvanization of Anchorage & Plates (Nozzing)
(300 Tons). |
| 9. |
Fabrication
and Galvanization of Steel Cat Ladders.( 34 Tons). |
| 10. |
Fabrication
of U.G. Towers in different Hights, complete with
Nuts and Bolts. |
| 11. |
Fabrication
of Steel Floating Pontoons. |
| 12. |
Fabrication
of Conveyors 600 x 25M to 30M, Screw Conveyors. |
| 13. |
Fabrication
and Galvanization of Lifting Devices. |
| 14. |
Fabrication
of Crane Beams.(160 Tons). |
| 15. |
Fabrication
of Bentonite/Klin.(35 Tons). |
| 16. |
Fabrication
of Stac Launching and Pads.(200 Tons). |
| |
| Project: |
Quaid-e-Azam International Airport
|
| Contractor: |
Sogea International (French) |
| Location: |
Karachi, Pakistan |
| Tenure: |
1990~1992 |
| Project Value: |
Approx Rs. 40 Millions |
| |
|
| HHTC’s
participation in the project: |
Our sizable project,
which we completed successfully, was the fabrication
and erection of Mild Steel, Stainless Steel and
Aluminum finishing joineries. We also fabricated
and installed specialized secondary structure nosing
weighing 20 tons and drainage accessories at Quaid-e-Azam
International Airport, Karachi.
We worked as one the largest subcontractors to French
company M/s Sogea Pakistan who were awarded the
main contract.
Appended below is a brief summary of our involvement
in the building and site development of the above
mentioned project specially highlighting the fabrication
and erection works.
|
| |
|
| 1. |
We have largely used Aluminum profile
of 200 x 70 mm which is the largest profile used in
Pakistan covering an area of 12000 Square meters in
curtain walls with 31 mm thick Sietral Glass. |
| 2. |
Glazing
partition with 6 mm wire mesh fireproof glass approx.
700 square meters. |
| 3. |
Divider
Screens between International and Domestic wings approx.
250 square meters. |
| 4. |
Doors,
windows, main entrances, automatic doors and smoke
outlets. |
| 5. |
Provision
of Seismic joints in full length glazed curtain walls. |
| 6. |
We
have fabricated at our workshop all steel and stainless
steel support devices and inserts for Aluminum Curtain
Walls. |
| 7. |
Sheet
metal Expansion Joint on entire project. |
| 8. |
Fabrication
and erection of 63 meter long visitors bridge in mild
steel rectangular piping (150 x 300 x 12)mm. |
| 9. |
Erection
& Installation of Traveling Crane 20 Tons. |
| 10. |
Fabrication
of ladders, Stairs & Cat Ladders for entire project
site. |
| 11. |
HVAC
Piping jobs complete with testing reports. |
| 12. |
Erection
of Flood Light Towers & Light Poles. |
| 13. |
Scaffolding
of all types having serviceable height upto 45 meters. |
| 14. |
Hand
balustrades, windows & louvers. |
| 15. |
Mild
steel section modular panel. |
| 16. |
Fabrication
and erection of steel screens for face sewage station. |
| 17. |
Steel
Grating and Checkered Plate Coverings. |
| 18. |
Fabrication
and Erection of Trusses of metal work in shed of 40
x 80 x 6 meters. |
| 19. |
Nozzing
with Epoxy coating in Apron area approx 24 tons. |
| 20. |
Under
ground water irrigation system. |
| 21. |
Aluminum
foot step guard Nozzing at entire Departure Bridge. |
| 22. |
Stainless
steel Chandler hanging Hoist and inserts with Installation. |
| |
| Project: |
|
| Contractor: |
Promet Engineering PTE Ltd.
(Italy) |
| Location: |
Karachi, Pakistan |
| Tenure: |
1994~1996 |
| Project Value: |
Approx Rs. 65 Millions |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Construction of
miscellaneous reinforce concrete foundations.
|
| 2. |
Construction
of warehouse and workshop. |
| 3. |
Construction
of condensate tank. |
| 4. |
Construction
of reinforce concrete in-ground structures-API separator;
API Skimmed Oil Pit and Slops Tanks. |
| 5. |
Construction of treated and Make-up
Water Tanks. |
| 6. |
Construction of Foundations to
Water and Condensate Tanks. |
| |
| Project: |
|
| Contractor: |
Lodigiani Spa
(Italy) |
| Location: |
Karachi, Pakistan |
| Tenure: |
1989~1991 |
| Project Value: |
Approx Rs. 8 Million |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Mild steel Pier
Fender with Rungs and bolts approx. 55 Tons.
|
| 2. |
Complete
fabrication and erection of Flood light tower weighing
130 Tons, and 26M high. All the towers finished in
hot dip Galvanizing. |
| 3. |
Mild
steel Floating barges for bracing control of size
2m x 3m x 6m long weighing approx 30 Tons. |
| 4. |
Fabrication
of steel shuttering (Form work) of different size
and shape of 35M long approx 30 Tons. |
| 5. |
Heavy
duty main doors for new fish market with sliding system. |
| 6. |
Erection
of work shop shade. |
| 7. |
Fabrication
of mobile office container for site. |
| 8. |
Fabrication
of steel ladder for control tower building. |
| 9. |
Fabrication
of louvers type steel doors and windows for Transformer
room. |
| 10. |
Installation
of checkered plate Trenching cover in all new sub
station. |
| 11. |
Erection
and installation of heavy duty Steel gate for boundary
wall. |
| |
| Project: |
New Terminal Complex at Allama
Iqbal
International Airport, Lahore
|
| Contractor: |
Civil Aviation Authority |
| Location: |
Lahore, Pakistan |
| Tenure: |
2003 |
| Project Value: |
Approx Rs. 7.65 Millions |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Fabrication &
Installation of Stainless Steel Planters.
|
| 2. |
Fabrication
& Installation of Stainless Steel Heavy Duty Waste
Disposal Bins. |
| 3. |
Fabrication
& Installation of Furniture for Concourse Hall. |
| 4. |
Fabrication
& Installation of Canopy over Ramp. |
| 5. |
Fabrication
& Installation of Bumper Guards. |
| |
| Project: |
Construction of Pre-Fab Building
Systems at New Terminal Complex at Allama Iqbal
International Airport, Lahore
|
| Contractor: |
Pakistan International Airline |
| Location: |
Lahore, Pakistan |
| Tenure: |
2002-2003 |
| Project Value: |
Approx Rs. 12.52 Millions |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Construction of
Cargo Sheds.
|
| 2. |
Construction of Custom Sheds. |
| 3. |
Construction
of Fruit Sheds. |
| 4. |
Various
extensions to existing sheds. |
| |
| Project: |
Pre-fab Industrial Buildings
|
| Contractor: |
|
| Location: |
Pakistan |
| Tenure: |
1999-2001 |
| Project Value: |
Approx Rs. 112 Millions |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Construction of
various Pre-Fab Industrial Buildings at their various
sites.
|
| |
| Project: |
|
| Contractor: |
Al-Mahd International |
| Location: |
Pakistan |
| Tenure: |
2002-2003 |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Steel Structural
Work for Rice Processing Plants.
|
| 2. |
Erection and Installation
of Machinery & Equipment. |
| |
| Project: |
|
| Contractor: |
Chawala International |
| Location: |
Pakistan |
| Tenure: |
2003 and running |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Steel Structural
Work for Rice Processing Plants at Karachi and Larkana
Sites.
|
| 2. |
Erection and Installation
of Machinery & Equipment at Karachi Site and Larkana
Site. |
| |
| Project: |
Manifold Structure at OP II Project
|
| Contractor: |
China Harbour Engineering
(Group) |
| Location: |
KPT Karachi |
| Tenure: |
2004 and running |
| |
|
| HHTC’s
participation in the project: |
| 1. |
Fabrication, painting,
erection of Manifold Structure at KPT.
|
| 2. |
Drilling of Holes in Rubber
Fenders. |
| 3. |
Additional Steel Structures
required at Project. |
| |
| STEEL STRUCTURAL
SUPPLIES BEING MADE TO OUR VARIOUS
|
| CLIENTS: |
| |
| Client: |
Fatema Trading Co LLC, UAE.
|
| Location: |
United Arab Emirates |
| Tenure: |
Since 2001 |
| |
|
| Detail
of Jobs performed: |
| • |
Fabricated Items
with Polishing/Powder Coating/Epoxy Coating: |
| 1. |
Stainless Steel
Pipe Fixing Clamps Dia 1200mm.
|
| 2. |
Stainless Steel Anchor Bolts
Dia 1” |
| 3. |
Stainless Steel Lifting
Key Dia 12mm |
| 4. |
Mild Steel U Clamps |
| 5. |
Aluminium Solid Ladders |
| 6. |
Aluminium Extruded (Hollow
Pipe) Ladders |
| 7. |
Chain Link Fencing Accessories. |
| 8. |
Mild Steel MITO Square Tube |
| 9. |
OVENS of size 20ft x 12ft
x 14ft high. |
| 10. |
Stainless Steel Wire Rope
Ends Ferrols |
| 11. |
After Filter for Cyclone |
| 12. |
Grid Dust Seperator |
| 13. |
Acoustic Canopy |
| 14. |
MS Turn Buckle |
| 15. |
MS full threaded studs of
M24 |
| 16. |
MS Anchor Plates |
| 17. |
GI Wire Rope |
| |
|
| • |
Casted Items with
Powder Coating: |
| 1. |
Bronze Duct Markers |
| 2. |
Bronze Indication Plates |
| 3. |
Bronze Information Plates |
| 4. |
Bronze Clamps Dia 100mm,
150mm |
| 5. |
Aluminium Surface Box |
| 6. |
Aluminium Fire Hydrant Box |
| 7. |
Aluminium Stop Valve Box |
| 8. |
Aluminium Sealing Flanges,
Dia 150mm, 200mm, 300mm, 400mm, 600mm, 900mm, 950mm,
1200mm, 1400mm. |
| 9. |
Aluminium Brackets for fixing
of Aluminium Ladders. |
| 10. |
Aluminium Ventilation Pipe
of 80mm, 100mm & 150mm Diameter. |
| 11. |
Aluminium Hand Railing |
| 12. |
Aluminium Pull Box |
| 13. |
Aluminium Median Railing
approx 45 Tons |
| 14. |
Aluminium Decorative Fencing
approx 8 Tons |
| 15. |
Aluminium Fencing 1.7 Mtr
high for 2.5 Kilo Meters |
| |
| Client: |
|
| Location: |
Islamabad |
| Tenure: |
Since 1998 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Construction of
Mobile Containers site accommodation of 40’
x 10’
|
| 2. |
Fabrication of Trolley Beams. |
| 3. |
Fabrication and Maintenance
of Spool & Poor Boy Degasser. |
| 4. |
Fabrication of Crane Beam
of 10 Tons. |
| 5. |
Fabrication of SS Panel
Boxes. |
| 6. |
Fabrication of Deck Pipe
Roller. |
| 7. |
Fabrication of Waste Bin
and Spill Collector. |
| 8. |
Fabrication of Platforms
for Man Rider winch with Pedestals. |
| 9. |
Fabrication of Various Equipment
Skid. |
| 10. |
Stainless Steel Wire Rope
Ends Ferrols |
| 11. |
Fabrication of Mud Collection
Tanks. |
| 12. |
Provision of Technical Staff
for maintenance/overhauling at RIG. |
| 13. |
Supply of Welding Plants,
Air Compressors with Operators on rental basis. |
| |
| Client: |
|
| Location: |
Dhodak Oilfields |
| Tenure: |
Since 1998 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Fabrication of
Lifting Beams of 5 tons to 30 tons lifting capacities.
|
| |
• |
1 No. Dinning Hall with
Kitchen. |
| |
• |
3 Nos. Two men Bed room
with attached bathrooms with Kitchen. |
| |
• |
4 Nos. Three Bedrooms with
attached bathrooms. |
| |
• |
1 No. Office Block. |
| |
• |
2 Nos. Eight person four
Bedrooms. |
| |
• |
1 No. Bathrooms and shower
units with Laundry. |
| 2. |
Boundary Wall
Fencing with Linked wire Net with Double Doors. |
| 3. |
Complete Fabrication
of workshop shed covering an area of 13000 square feet. |
| 4. |
120 different
types of Cast in Items (embedded in concrete) weighing
60 Tons treated with Hot Dip Galvanizing. |
| |
| Client: |
|
| Location: |
Karachi |
| Tenure: |
Since 1994 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Manhole Cover
frames 300 nos.
|
| 2. |
Manhole Cover
800 Nos. with locking system. |
| 3. |
Cable brackets
for cable laying 1500 Nos. of 15 different types with
hot dip galvanizing. |
| 4. |
Under Ground
Cable support brackets. |
| 5. |
Cable clamps
of aluminum die casting. |
| 6. |
Pulling Hook
for 18000 lines cable. |
| 7. |
Cable curve
support brackets with handle. |
| 8. |
Lifting hooks
for main hole covers. |
| 9. |
Sign cones 300
Nos. |
| 10. |
Road signs 120
Nos. |
| 11. |
Knave cable
clamps |
| 12. |
Cable Sleeves |
| 13. |
Cable Diversion
Rollers 2 x 3 rollers 18 Nos. |
| 14. |
Edge rollers |
| 15. |
Triple roller
cable supports |
| 16. |
Cable splicing
container |
| 17. |
Toe Drum Trailer
capacity of 10 Tons, 4 Nos. |
| 18. |
Panel Base access
100 nos. |
| 19. |
Optic fiber
splicing mobile unit with all the necessary equipment. |
| 20. |
Some of the
key equipments were provided by us on rental basis to
facilitate site working. |
| |
• |
Diesel driven Air compressor with jack
and Trolley 2 Nos. |
| |
• |
Pneumatic Jack Hammers 5 Nos. |
| |
• |
Cars, Trucks and Pickups. |
| |
| Client: |
|
| Location: |
Karachi |
| Tenure: |
Since 1990 |
| |
|
| Detail
of Steel Structures: |
| 1. |
Complete fabrication
and erection work in Pharmaceuticals project of
Boots Pakistan Ltd.
|
| 2. |
More than 12000
Nos. mild steel and 300 Nos. stainless steel Pallets
of 16 BWG. |
| 3. |
Complete Racking
system for Raw material store, Bottles store, finished
goods store, Spare area and cold storage. |
| 4. |
Design and Fabrication
of stainless steel Bottle washing plant and Dryer. |
| 5. |
Stainless steel
Vessels of assorted size approx. 50 Nos. |
| 6. |
Fabrication
and Erection of Monorail of 2 Tons. |
| 7. |
Fire exits stairs
of mild steel checkered plates. |
| 8. |
Stainless steel
ladders and platforms. |
| 9. |
Erection and
Installation of Glatt Fluid Bed dryer. |
| 10. |
Stainless steel
double Cone blender 1200 Liters capacity. |
| 11. |
Stainless steel
Powder mixing Drum. |
| 12. |
Mild steel
Ladies and Gents Lockers 1000 Nos. and M S Cabinets. |
| 13. |
Fabrication
and Erection of M.S. Shed for storage of drums covering
an area of 12600 square meters. |
| 14. |
Fabrication
and Fixing of Industrial Kitchen, shelves, Cabinets,
exhaust hood and other Kitchen related items. |
| 15. |
Stainless steel
Conveyers upto 90 ft longs for packing halls. |
| 16. |
Stackable Drum
Pallets 500 Knows. |
| 17. |
Stainless steel
cabinets, Dispensing Table, trays, trolleys, and stainless
steel hoods. |
| 18. |
Complete boundary
wall Grills with chain links and H D Gates. |
| 19. |
Stainless steel
jacketed Vessels with Platform. |
| 20. |
Erection and
Installation of Johnson filter press, Blenders and mezzanine
floor. |
| 21. |
Complete Mild
steel structure shed for cycle stand. |
| 22. |
Over Head diesel
storage tank. |
| 23. |
Fabrication
of Burning Chamber. |
| 24. |
Installation
and commissioning of fresh Air and Ventilation ducts. |
| 25. |
Shelving system
for Engineering store with Mezzanine floor. |
| 26. |
Stainless steel
and Mild steel Grating in Production area and HVAC plant
room respectively including checkered plates footboards. |
| 27. |
Installation
of Gas line, Water line and Air intake line. |
| 28. |
Erection of
Pipe structure for Green house. |
| 29. |
Heavy Duty Sheet
Metal Doors with insulation and locking system of complete
project. |
| 30. |
Galvanized sheet
Cable trays and trenching at entire project site. |
| |
| Client: |
|
| Location: |
Karachi |
| Tenure: |
Since 1991 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Erection and fabrication
of Boiler chimney 18 inches in Dia x 40 ft. height.
|
| 2. |
Kerosene storage tank of
10000 liters. |
| 3. |
Racking system in warehouse
and in stores. |
| 4. |
Mild steel Pallets of 16
BWG 2000 Nos. |
| 5. |
Stainless steel Conveyer
of 120 Rft. |
| 6. |
S.S Trolley of different
size and type with SS Trays. |
| 7. |
S.S Laminar flow stand,
steel Hatch, shoes barriers, towel stands, cabinets,
stainless steel sinks and many other utilities in new
project. |
| 8. |
Fabrication and Jacketing
of 1500 liter service vessel. |
| 9. |
Supply and installation
of GI pipe lining for pesticide plant. |
| 10. |
S.S Trolleys, S.S assorted
size boxes and working benches. |
| 11. |
S.S air supply system in
coating pan. |
| |
| Client: |
|
| Location: |
Badin, Sindh |
| Tenure: |
Since 1993 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Barges 3m x 8m
x 4m H x L x W.
|
| 2. |
Mobile containers
site accommodation and ancillary services caravans
of 40ft x 10ft. :
|
| |
• |
5 Nos. Bed sleeper with
attached bathrooms. |
| |
• |
1 No. Dispensary unit with
first aid room and attached bathroom. |
| |
• |
1 No. Dinning unit with
kitchen. |
| |
• |
2 Nos. Office unit with
bathrooms amenities. |
| 3. |
Mild steel Lockers,
cabinets and wardrobes. |
| 4. |
Spreader bars
and other fabrication items. |
| |
| Client: |
|
| Location: |
Karachi |
| Tenure: |
Since 1997 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Generator Toe
Trolley for 34,60,70 and 210 KVA Power Generating
sets.
|
| 2. |
Canopy for the above trolleys. |
| 3. |
Acoustic Canopy for 70,
34, and 210 KVA Generating Sets. |
| 4. |
Mobile Containers 13 Nos.,
20ft and 40ft. |
| |
| Client: |
|
| Location: |
KIA, Karachi. |
| Tenure: |
Since 2003 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Fabrication of
Stainless Steel Furniture & Fixtures
|
| |
a. |
Stainless Steel Trolleys |
| |
b. |
Stainless Steel Tables |
| |
c. |
Stainless Steel Bowl/Vessels/Drums |
| |
d. |
Stainless Steel Rollers |
| 2. |
Fabrication
of MS Palettes |
| 3. |
Fabrication
of Stainless Steel Tanks |
| |
| Client: |
Contrak International Inc.
|
| Location: |
C/O. US Embassy, Kabul,
Afghanistan |
| Tenure: |
Since 2003 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Fabrication of
Porta Cabins.
|
| |
| Client: |
ENAR Petrotech Services (Private)
Limited
|
| Location: |
Karachi, (National Refinery
Pvt Ltd.) |
| Tenure: |
Since 2002 |
| |
|
| Detail
of Jobs performed: |
| 1. |
Stainless Steel
Float Level Gauges for 4000mm Dia Tank with guide
wires and supporting structures.
|
| 2. |
Stainless Steel Float Level
Gauges for 2000mm Dia Tank with guide wires and supporting
structures. |
| 3. |
Fabrication of complete
Oil Separation Skimmer. |
| 4. |
Manufacturing of Bronze
over Pressure Relief Valves, Vacuum Relief Valves and
Liquie Over Flow Valves. |
| |
| Client: |
|
| Location: |
Karachi |
| Tenure: |
Since 2001 |
| | |